Hyundai Ioniq: Hybrid Motor Control System / Motor Temperature Sensor. Schematic diagrams

Motor Temperature Sensor. Description and operation

Description• Motor temperature affects the motor power significantly.• If the motor overheats, its main components, including permanent magnet, stator coil, etc...

Motor Temperature Sensor. Repair procedures

Inspection1.Check the temperature sensor resistance. [Hybrid drive motor] Measuring equipment : Multimeter Category Inspection area Inspection criteria Remarks Resistance(Temperature sensor)Pin 4 - 88kΩ (30°C / 86°F) - 20kΩ (10°C / 50°F)10 - 30°C / 50 - 86°F [Hybrid starter generator (HSG)] Measuring equipment : Multimeter Category Inspection area Inspection criteria Remarks Resistance(Temperature sensor)Pin 4 - 9126...

Other information:

Hyundai Ioniq (AE) 2017-2025 Service Manual: Troubleshooting

Troubleshooting Error Item Failure symptom Inspection items Detailed inspections Relevant Parts/ Components Screen displayTFT-LCD screen does not turn on1)Connector attachments2)Components1)Check the connector attachments2)Check B+, IGN and GND wiring3)Check the components Connectors, wiring, fuses, dashboardWarning lightAirbag warning lamp malfunction1)Connector attachments2)C-CAN3)Components1)Check airbag + signal (connectors)2)Check C-CAN (ACU4) signal3)Check the FPC attachment inside the dashboardACU Connectors, wiring, fuses, dashboardMode conversionIntegrated driving mode malfunction1)Connector attachments2)Switch3)Components1)Check the switch input (connector)2)Check the switch signal input(disconnection or shorting)3)Check conversion with dashboard componentSwitch connector, wiring dashboardIlluminationInterior light brightness cannot be controlled...

Hyundai Ioniq (AE) 2017-2025 Service Manual: Front Door Inside Handle. Repair procedures

Replacement1.Remove the front door trim.(Refer to Front Door - "Front Door Trim")2.After loosening the mounting screws, remove the front door inside handle (A).3.To install, reverse the removal procedure.    • Make sure the door locks / unlocks and opens / closes properly...