| Special Service Tools |
|
Tool (Number and Name)
|
Illustration
|
Use
|
| 09568-1S100 Ball joint puller |
| Saperate the ball joint from the front alxe |
Specifications Item Specification TypeElectric Power Steering SystemSteering gearTypeRack & PinionRack stroke154 ± 1 mm (6.
Troubleshooting Trouble Symptom Cause of the symptom Remedy Excessive play in steeringLoose U-joint boltRetighten or replace as necessaryLoose yoke plugRetightenLoose steering gear mounting boltsRetightenLoose or worn tie rod endRetighten or replace as necessarySteering wheel does not return to its original positionExcessive turning resistance of tie rod endReplaceYoke plug excessively tightAdjustTie rod and/or ball joint cannot turn smoothlyReplaceLoose mounting of gear box at the subframeRetightenWorn steering shaft joint and/or body grommetCorrect or replaceDistorted rackReplaceRattling or chucking noise in the rack and pinionLoose steering gear box mountingRepositionLoose tie rod end and/or ball jointRepaceWorn tie rod and/or ball jointRepaceLoose yoke plugReplace
S
Removal1.Disconnect the negative (-) battery terminal.2.Remove the rear bumper.(Refer to Body - "Rear Bumper")3.Remove the rear corner radar unit (A) after loosening the mounting nuts. • Take care not to separate the bracket from rear bumper when removing the rear corner radar sensor.