Hyundai Ioniq: Restraint / Special service tools

Hyundai Ioniq (AE) 2017-2025 Service Manual / Restraint / Special service tools

Special Service Tools

Tool (Number and Name)	Illustration	Use
Deployment tool 0957A-34100A		Airbag deployment tool. Use with (0957A-AL140, 0957A-AL160)
Dummy 0957A-38200		Simulator to check the resistanceof each wiring harness. Use with (0957A-AL170, 0957A-AL190)
Airbag deployment & dummy adapter kit 0957A-AL100		Use with airbag deployment and airbag inspection
Deployment adapter 0957A-AL140		Use with deployment tool. (0957A-34100A) (DAB, PAB, CAB, BPT, EFD)
Deployment adapter 0957A-AL160		Use with deployment tool. (0957A-34100A) (SAB, KAB)
Dummy adapter 0957A-AL170		Use with dummy (0957A-38200) (DAB, PAB, CAB, BPT, EFD)
Dummy adapter 0957A-AL190		Use with dummy (0957A-38200) (SAB, KAB)

DAB : Driver Airbag

PAB : Passenger Airbag

SAB : Side Airbag

CAB : Curtain Airbag

KAB : Knee Air Bag

BPT : Seat Belt Pretensioner

EFD : Emergency fastening Device

Specifications

Specification Item Resistance (Ω) Driver Airbag (DAB)2.0 - 6.0Passenger Airbag (PAB)1.6 - 6.0Knee Airbag (KAB)1...

General safety information and caution

PrecautionsGeneral PrecautionsPlease read the following precautions carefully before performing the airbag system service. Observe the instructions described in this manual, or the airbags could accidentally deploy and cause damage or injuries...

Other information:

Hyundai Ioniq (AE) 2017-2025 Owner's Manual: Parking Distance Warning (Reverse) System

The Parking Distance Warning (Reverse) System assists the driver during reverse movement of the vehicle by chiming if any object is sensed within approximately 50 in (120 cm) behind the vehicle. This system is a supplemental system that senses objects within the range and location of the sensors, it cannot detect objects in other areas where sensors are not installed...

Hyundai Ioniq (AE) 2017-2025 Service Manual: Emergency Call (eCall) Antenna. Repair procedures

Removal1.Disconnect the negative (-) battery terminal.2.Remove the roof trim assembly.(Refer to Body - "Roof Trim Assembly")3.Disconnect the roof antenna cable and connectors (A).4.Remove the roof antenna after loosening a nut (A).Installation • Make sure that the cables and connectors are plugged in properly...