Hyundai Ioniq: If You Have a Flat Tire / With Tire Mobility Kit (TMK) - Type A

Hyundai Ioniq (AE) 2017-2024 Owner's Manual / What to do in an emergency / If You Have a Flat Tire / With Tire Mobility Kit (TMK) - Type A

Hyundai Ioniq. With Tire Mobility Kit (TMK) - Type A

For safe operation, carefully read and follow the instructions in this manual before use.

(1) Compressor

(2) Sealant bottle

The Tire Mobility Kit is a temporary fix to the tire and the tire should be inspected by an authorized HYUNDAI dealer as soon as possible.

CAUTION

One sealant bottle for one tire

When two or more tires are flat, do not use the tire mobility kit because the supported one sealant of Tire Mobility Kit is only used for one flat tire.

WARNING

Tire wall

Do not use the Tire Mobility Kit to repair punctures in the tire walls. This can result in an accident due to tire failure.

WARNING

Temporary fix

Have your tire repaired as soon as possible. The tire may lose air pressure at any time after inflating with the Tire Mobility Kit.

Changing tires

WARNING A vehicle can slip or roll off of a jack causing serious injury or death to you or those nearby. Take the following safety precautions: Never place any portion of your body under a vehicle that is supported by a jack...

Introduction

With the Tire Mobility Kit you stay mobile even after experiencing a tire puncture. The compressor and sealing compound system effectively and comfortably seals most punctures in a passenger car tire caused by nails or similar objects and reinflates the tire...

Other information:

Hyundai Ioniq (AE) 2017-2024 Service Manual: Reservoir Tank. Repair procedures

Removal and installation1.Loosen the drain plug, and drain the engine coolant. Remove the reservoir cap to help drain the coolant faster.(Refer to Cooling System - "Coolant")2.Remove the reservoir tank.(1)Disconnect the over flow hose (A).(2)Disconnect the reservoir tank water hoses (B)...

Hyundai Ioniq (AE) 2017-2024 Service Manual: Description and operation

DescriptionCrankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal input, the engine may stop because of CKPS signal missing.This sensor is installed in ladder frame and generates alternating current by magnetic flux field which is made by the sensor and the target wheel when the engine rotates...