Hyundai Ioniq (AE): LCD Display Messages / Check Hybrid system. Do not start engine, Stop vehicle and check power supply
Check Hybrid system. Do not start engine
This message is displayed when the hybrid battery power (SOC) level is low. A warning chime will sound until the problem is solved.
In this case have your vehicle inspected by an authorized HYUNDAI dealer.
Stop vehicle and check power supply
This message is displayed when a failure occurs in the power supply system.
In this case, park the vehicle in a safe location and tow your vehicle to the nearest authorized HYUNDAI dealer and have the vehicle inspected.
Check Hybrid system This message is displayed when there is a problem with the hybrid control system. Refrain from driving when the warning message is displayed.
Stop vehicle to charge battery/ Park with engine On to charge battery Either message is displayed when the hybrid battery power (SOC) level is low. In this case, park the vehicle in a safe location and wait until the hybrid battery is charged.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Heater Core. Repair procedures
Replacement1.Disconnect the negative (-) battery terminal. 2.Remove the heater and blower assembly.(Refer to Heater - "Heater Unit") 3.Loosen the mounting screws and remove the driver's temperature control actuator (A).4.Remove the heater core cover (A) after loosening the mounting screws.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Mode Control Actuator. Description and operation
DescriptionThe mode control actuator is located at the heater unit.It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Jump Starting
- Engine Clutch System
- Suspension System
- New on site
- Most important about car
