Hyundai Ioniq (AE): Owner Maintenance / How to Disconnect the (-) Cable for Regular Maintenance (Hybrid vehicle)
When the vehicle is under regular maintenance, make sure to separate the (-) cable before maintenance. Separate the (-) cable following the below instructions.
1. Fold the rear left side seat.
2. Remove the service cover (A) on the luggage trim.
3. Separate the (-) cable (B). Reassemble in the reverse order.
WARNING Performing maintenance work on a vehicle can be dangerous. If you lack sufficient knowledge and experience or the proper tools and equipment to do the work, have it done by an authorized HYUNDAI dealer.
When you stop for fuel: Check the engine oil level. Check the coolant level in the engine coolant reservoir. Check the windshield washer fluid level.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Auto Defogging Sensor. Repair procedures
Diagnosis With GDS1.The heating, ventilation and air conditioning can be quickly diagnosed failed parts with vehicle diagnostic system (GDS).※ The diagnostic system (GDS) provides the following information.(1) Self diagnosis : Checking the failure code (DTC) and display.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Rear Corner Radar Unit. Repair procedures
Removal1.Disconnect the negative (-) battery terminal.2.Remove the rear bumper.(Refer to Body - "Rear Bumper")3.Remove the rear corner radar unit (A) after loosening the mounting nuts. • Take care not to separate the bracket from rear bumper when removing the rear corner radar sensor.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Engine Mounting. Components and components location
- Child-Protector Rear Door Locks
- Transmission Gear Oil. Repair procedures
- New on site
- Most important about car
