Hyundai Ioniq (AE): LCD Display Messages / Low/High System Temp. Maintaining Hybrid mode, Low/High System Temp. Switching to Hybrid mode (Plug-in hybrid vehicle)

Hyundai Ioniq (AE) 2017-2022 Owner's Manual / Convenient features of your vehicle / Instrument Cluster / LCD Display Messages / Low/High System Temp. Maintaining Hybrid mode, Low/High System Temp. Switching to Hybrid mode (Plug-in hybrid vehicle)

Low/High System Temp. Maintaining Hybrid mode (Plug-in hybrid vehicle)

Hyundai Ioniq. to Hybrid mode (Plug-in hybrid vehicle)

This message is displayed when the temperature of the high-voltage (hybrid) battery is too low or too high. This warning message is to protect the battery and the hybrid system.

Low/High System Temp. Switching to Hybrid mode (Plug-in hybrid vehicle)

Hyundai Ioniq. to Hybrid mode (Plug-in hybrid vehicle)

This message is displayed when the temperature of the high-voltage (hybrid) battery is too low or high. This warning message is to protect the battery and the hybrid system.

    This message is displayed when the vehicle maintains the HEV mode to allow heating or air conditioning. The mode does not change when the driver presses the [EV/HEV] button to switch from the HEV mode to EV mode while the heating and cooling system is on and the coolant temperature is below 7 °F (-14 °C).

    Switching to Hybrid mode to lubricate engine (Plug-in hybrid vehicle) This message is displayed when the vehicle is automatically switched to the HEV mode to lubricate engine while the Engine Start/Stop button is in the ON position.

    Other information:

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: PTC Heater. Description and operation

    DescriptionThe PTC (Positive Temperature Coefficient) heater is installed at the exit or the backside of the heater core.The PTC heater is an electric heater using a PTC element as an auxiliary heating device that supplements deficiency of interior heat source in highly effective hybrid engine.

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Special service tools

    Special Service Tools Tool Name / Number Illustration Description LKA Compensator(09964-C1100)Used for compensating front view camera unitBCW Sensor Correction Tool Set(09958-3T500)Used to correct the blind-spot radar unit.

    Categories

     
    Copyright © 2026 www.hioniqae.com - 0.0134