Hyundai Ioniq (AE): LCD Display Messages / Low Washer Fluid, Low Fuel, Engine has overheated / Engine overheated, Check High Beam Assist (HBA) system

Hyundai Ioniq (AE) 2017-2022 Owner's Manual / Convenient features of your vehicle / Instrument Cluster / LCD Display Messages / Low Washer Fluid, Low Fuel, Engine has overheated / Engine overheated, Check High Beam Assist (HBA) system

Low Washer Fluid (if equipped)

This message is displayed if the washer fluid level in the reservoir is nearly empty.

Have the washer fluid reservoir refilled.

Low Fuel

This message is displayed if the fuel tank is almost out of fuel.

When this message is displayed, the low fuel level warning light in the cluster will come on.

It is recommended to look for the nearest fueling station and refuel as soon as possible.

Add fuel as soon as possible.

Engine has overheated / Engine overheated

Either message is displayed when the engine coolant temperature is above 248°F (120°C). This means that the engine is overheated and may be damaged.

Check High Beam Assist (HBA) system

Hyundai Ioniq. High Beam Assist (HBA) system

This warning message is displayed if there is a problem with the High Beam Assist (HBA) system. Have the vehicle inspected by an authorized HYUNDAI dealer.

    Low Pressure This message is displayed if the tire pressure is low. The corresponding tire on the vehicle will be illuminated. Turn on FUSE SWITCH/ Turn FUSE SWITCH On Either message is displayed if the fuse switch located on the fuse box under the steering wheel is OFF.

    Lights Mode This indicator displays which exterior light is selected using the lighting control. Wiper This indicator displays which wiper speed is selected using the wiper control.

    Other information:

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Heater Unit. Repair procedures

    Replacement    When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.1.Disconnect the negative (-) battery terminal.2.Recover the refrigerant with a recovery / recycling / charging station.

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Smart Cruise Control (SCC) Switch. Repair procedures

    Removal1.Disconnect the negative (-) battery terminal.2.Remove the steering wheel assembly.(Refer to Steering System -"Steering Wheel")3.Remove the steering back cover (A).4.Remove the steering remote control connector (A).5.Remove the steering remote control (A), after loosening the screws.

    Categories

     
    Copyright © 2026 www.hioniqae.com - 0.0163