| Removal |
| 1. | Disconnect the negative (-) battery terminal. |
| 2. | Remove the glove box. (Refer to Body - "Glove Box Upper Cover Assembly") |
| 3. | Remove the smart key unit. (Refer to Body - "Smart Key Unit") |
| 4. | Disconnect the body control module connectors (B).
|
| 5. | Remove the body control module (A) after loosening the mounting nuts.
|
| Installation |
| 1. | Install the body control module. |
| 2. | Connect the body control module. |
| 3. | Install the glove box upper cover assembly. |
| BCM Diagnosis with GDS |
| 1. | The body electrocal system can be quickly diagnosed failed parts with vehicle diagnostic system (GDS). The diagnostic system (GDS) provides the following information.
|
| 2. | Select the "Car Model" and the system to be checked in order to check the vehicle with the tester. |
| 3. | Select the "Body Control Module (BCM)" to check body control module. |
| 4. | Select the "Current Data" menu to search the current state of the input/output data. The input/output data for the sensors corresponding to the "Body Control Module (BCM)" can be checked.
|
| 5. | If you want to change user option, select "User Option".
|
DescriptionBody Control Module (BCM) function No Item Description 1Washer Linked Wiper– If the washer switch is pressed ON for 0.
InspectionOperating Logic Test (Manual only)Inspect the PTC operation by confirmation logic as follows.1.Entering(1)Set the Floor mode and maximum heating position.(2)Turn off the blower switch.(3)Press the intake (recirculation) button 5 times or more.
DescriptionThe smart cruise control unit is installed on the front right side of the chassis. A radar sensor is embedded in the front section of the unit. This sensor detects vehicles and objects in front of the vehicle. The radar sensor can detect up to 64 objects ahead of a vehicle.