| Components |

| 1. Front door trim 2. Front door pull cap 3. Front door belt inside weatherstrip 4. Front door quadrant inner cover 5. Front door module 6. Front door panel | 7. Front door side impact pad 8. Front door belt outside weatherstrip 9. Front door body side weatherstrip 10. Front door side weatherstrip 11. Front door hinge |
AdjustmentGlass Adjustment • Check the glass run channel for damage or deterioration, and replace it if necessary.
Replacement When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.1.Disconnect the negative (-) battery terminal.2.Recover the refrigerant with a recovery / recycling / charging station.
RemovalWarning Indicator1.Disconnect the negative (-) battery terminal.2.Remove the mirror (A).InstallationWarning Indicator1.Install the outside mirror.2.Connect the negative (-) battery terminal.Inspection1.Apply battery voltage to each terminal as shown in the table and verify that the mirror operates properly.