Hyundai Ioniq (AE): Engine Control System / Exhaust Gas Temperature Sensor (EGTS). Specifications
| Specification |
|
Temperature [°C (°F)]
|
Resistance (kΩ)
|
| -40 (-40) | 0.17 |
| 0 (-32) | 0.201 |
| 100 (212) | 0.276 |
| 200 (392) | 0.35 |
| 300 (572) | 0.42 |
| 400 (752) | 0.489 |
| 500 (932) | 0.555 |
| 600 (1112) | 0.618 |
| 700 (1292) | 0.68 |
| 800 (1472) | 0.739 |
| 850 (1562) | 0.767 |
DescriptionInstalled in exhaust manifold, the Exhaust Gas Temperature Sensor (EGTS) #1 for EWGA senses the temperature of exhaust gas flowing into the EWGA.
Circuit DiagramEGTS #1Harness ConnectorEGTS #2Harness Connector
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Heater Core. Repair procedures
Replacement1.Disconnect the negative (-) battery terminal. 2.Remove the heater and blower assembly.(Refer to Heater - "Heater Unit") 3.Loosen the mounting screws and remove the driver's temperature control actuator (A).4.Remove the heater core cover (A) after loosening the mounting screws.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Rear Corner Radar Unit. Repair procedures
Removal1.Disconnect the negative (-) battery terminal.2.Remove the rear bumper.(Refer to Body - "Rear Bumper")3.Remove the rear corner radar unit (A) after loosening the mounting nuts. • Take care not to separate the bracket from rear bumper when removing the rear corner radar sensor.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Child-Protector Rear Door Locks
- If the 12 Volt Battery is Discharged (Hybrid Vehicle)
- How to Connect Portable Charger (ICCB: In-Cable Control Box)
- New on site
- Most important about car
