Hyundai Ioniq (AE): Child restraint system (CRS) / Installing a Child Restraint System (CRS)

WARNING

Before installing your child restraint system always:

• Read and follow the instructions provided by the manufacturer of the child restraint.
• Read and follow the instructions regarding child restraint systems in this manual.

Failure to follow all warnings and instructions could increase the risk of the SERIOUS INJURY or DEATH if an accident occurs.

WARNING

If the vehicle headrest prevents proper installation of a child seat (as described in the child seat system manual, the headrest of the respective seating position shall be readjusted or entirely removed.

After selecting a proper child seat for your child, check to make sure it fits properly in your vehicle. Follow the instructions provided by the manufacturer when installing the child seat. Note these general steps when installing the seat to your vehicle:

• Properly secure the child restraint to the vehicle. All child restraints must be secured to the vehicle with the lap part of a lap/shoulder belt or with the LATCH system.
• Make sure the child restraint is firmly secured. After installing a child restraint to the vehicle, push and pull the seat forward-and-back and side-to-side to verify that it is securely attached to the seat. A child restraint secured with a seat belt should be installed as firmly as possible. However, some side-toside movement can be expected.
• Secure the child in the child restraint. Make sure the child is properly strapped in the child restraint according to the manufacturer instructions.

CAUTION

A child restraint in a closed vehicle can become very hot.To prevent burns, check the seating surface and buckles before placing your child in the child restraint.

• Lower Anchors and Tether for Children (LATCH System)
• Securing a child restraint with the LATCH anchors system
• Securing a child restraint seat with "Tether Anchor" system
• Securing a child restraint with lap/shoulder belt