Hyundai Ioniq (AE): Light Bulbs / License Plate Light Bulb Replacement
1. Using a flat-blade screwdriver, gently pry the lens cover from the lamp housing.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb.
4. Reinstall in the reverse order.
1. Open the liftgate. 2. Gently remove the cover of the liftgate trim. 3. Remove the spoiler plug hole. 4. Disconnect the electrical connector. 5. Loosen the mounting bolts and remove the spoiler.
Map lamp and room lamp â– Map lamp (LED type) â– Room lamp (LED type) Your vehicle is equipped with LED lamps. LED lamps do not have replaceable bulbs.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Evaporator Temperature Sensor. Description and operation
DescriptionThe evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator from freezing by excessive cooling. The evaporator temperature sensor has the Negative Temperature Coefficient (NTC).
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Heater Unit. Repair procedures
Replacement When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.1.Disconnect the negative (-) battery terminal.2.Recover the refrigerant with a recovery / recycling / charging station.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Checking the Coolant Level
- Transmission Gear Oil. Repair procedures
- Brake Fluid
- New on site
- Most important about car
