Warning and Caution Labels1. Coolant caution2. High voltage caution3. Fan caution4. Auxiliary 12V battery caution5. High voltage battery cautionAuxiliary 12V battery Caution Label DescriptionWarning / Caution Label (Cont'd)A.
Lift and Support Points1.Place the lift blocks under the support points as shown in the illustration.2.Raise the hoist a few inches (centimeters) and rock the vehicle to be sure it is firmly supported.
Inspection1.Connect the battery voltage and check the blower motor rotation.2.If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation.3.Replace the blower motor if it is proved that there is a problem with it.
Removal1.Disconnect the negative (-) battery terminal.2.Remove the front / rear bumper cover.(Refer to Body - "Front Bumper Cover")(Refer to Body - "Rear Bumper Cover")3.Disconnect the connector (A) from the parking assist sensor.4.Remove the sensor (A) by pulling out both ends of the sensor holder.