Hyundai Ioniq (AE): Side View Mirrors / Side view mirror control

Hyundai Ioniq. Side view mirror control

Adjusting the side mirrors:

1. Press either the L (driver's side) or R (passenger's side) button (1) to select the side view mirror you would like to adjust.

2. Use the mirror adjustment control switch to position the selected mirror up, down, left or right.

3. After adjustment, put the button into neutral (center) position to prevent inadvertent adjustment.

NOTICE

  • The mirrors stop moving when they reach the maximum adjusting angles, but the motor continues to operate while the switch is pressed. Do not press the switch longer than necessary, because this can damage the motor.
  • Do not attempt to adjust the side view mirrors by hand, because this can damage the motor.

    The Blind Spot Mirror (BSM) is a supplemental mirror that reduces the driver’s blind spot by showing the rear side area of the vehicle. The blind spot mirror is equipped on the left-hand side view mirror.

    To fold the side view mirrors, grasp the housing of the mirror and then fold it toward the rear of the vehicle.

    Other information:

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Mode Control Actuator. Description and operation

    DescriptionThe mode control actuator is located at the heater unit.It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Repair procedures

    Service Point Target Auto Calibration (SPTAC)When you need calibration :– Front view camera is removed and mounted– Replace front view camera with a new one – Windshield glass changed– Front view camera coupler of the windshield glass is deformedService Point T

    Categories

     
    Copyright © 2026 www.hioniqae.com - 0.0199