Hyundai Ioniq (AE): Brake System / Specifications

Specifications
Item
Specification
Front disc brake
Type
Ventilated disc
Disc O.D.
Ø 280 mm (11.02 in)
Disc thickness
22 mm (0.87 in)
Caliper piston
Single
Cylinder I.D.
Ø 57.2 mm (2.25 in)
Rear disc brake
Type
Solid disc
Disc O.D.
Ø  262 mm (10.31 in)
Disc thickness
10 mm (0.39 in)
Caliper piston
Single
Cylinder I.D.
Ø 33.18 mm (1.31 in)
Parking brake
Type
BIR (Ball-in-Ramp)
Actuation
Lever

Specification (ESP)
Part
Item
Standard value
Remark
Integrated Brake Actuation Unit (IBAU)
System
4 Channel 4 Sensor (Solenoid)
Total control
(ABS, EBD, TCS, ESC)
Type
Valve relay integrated type
Operating Voltage
10 - 15V
Operating Temperature
-40 - 120 °C (-40 - 248°F)
Active Wheel speed sensor
Supply voltage
DC 4.5 - 20V
 
Output current low
5.9 - 8.4 mA
 
Output current high
11.8- 16.8 mA
 
Output range
1 - 2500 Hz
 
Tone wheel
Front: 46 teeth, Rear: 46 teeth
 
Air gap
0.4 - 1.5 mm
 
Pressure Source Unit
(PSU)
System
3 piston pump/ high pressure accumulator system
 
Operating Voltage
10 - 15V
 
Operating Temperature
-40 - 120°C (-40 - 248°F)
 

Service Standard
Items
Standard value
Brake pedal Full stroke
137.0 mm ( 5.39 in)
Stop lamp switch clearance
1.0 - 2.0 mm (0.04 - 0.08 in)
Brake pedal free play
3 - 8 mm (0.12 - 0.31 in)
Front brake disc thickness
22.0 mm (0.87 in)
Front brake disc service limit
20.0 mm (0.79 in)
Front brake disc pad thickness
17.0 mm (0.67 in)
Front brake disc service limit
8.0 mm (0.31in)
Rear brake disc thickness
10.0 mm (0.39 in)
Rear brake disc service limit
8.4 mm (0.33 in)
Rear brake disc pad thickness
15.0 mm (0.60 in)
Rear brake disc service limit
7.0 mm (0.28 in)

Tightening Torques
Items
N.m
kgf.m
lb-ft
Tire wheel hub nut
107.9 - 127.5
11.0 - 13.0
79.6 - 94.0
Air bleeding screw
6.9 - 12.7
0.7 - 1.3
5.1 - 9.4
Brake tube flare nuts
13.7 - 16.7
1.4 - 1.7
10.1 - 12.3
Front caliper guide rod bolts
21.6 - 31.4
2.2 - 3.2
15.9 - 23.1
Rear caliper guide rod bolts
21.6 - 31.4
2.2 - 3.2
15.9 - 23.1
Front caliper assembly to knuckle
98.1 - 117.7
10.0 - 12.0
72.3 - 86.8
Rear caliper assembly to knuckle
63.7 - 73.5
6.5 - 7.5
47.0 - 54.2
Brake hose to caliper
24.5 - 29.4
2.5 - 3.0
18.1 - 21.7
Brake pedal member bracket bolts
16.7 - 25.5
1.7 - 2.6
12.3 - 18.8
Brake pedal mounting nut
12.7 - 19.6
1.3 - 2.0
9.4 - 14.5
Wheel speed sensor mounting bolt
7.8 - 11.8
0.8 - 1.2
5.8 - 8.7
IBAU bracket mounting bolts
10.8 - 12.7
1.1 - 1.3
8.0 - 9.4
IBAU Brake Tube Flare nuts
13.7 - 16.7
1.4 - 1.7
10.1 - 12.3
PSU Bracket mounting bolts
19.6 - 29.4
2.0 - 3.0
14.5 - 21.7

Lubricants
Items
Recommended
Quantity
Brake fluid
DOT 3 or DOT 4
As required
Brake pedal bushing and bolt
Chassis grease
As required
Parking brake shoe and backing plate contacting surface
Heat resistance grease
As required

    High Voltage Shut-off Procedures    â€¢ Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system.

    Special Service Tools Tool (Number and Name) Illustration Use 09581-2T100Piston expanderSpreading the front and rear disc brake piston.

    Other information:

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Ambient Temperature Sensor. Description and operation

    DescriptionThe ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.The sensor output will be used for discharge temperature control, temperature regulation door contrl, blower m

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Blower Unit. Components and components location

    Component Location1. Blower unit assembly Components1. Duct Seal2. Intake duct case3. Air intake door assembly4. Intake door5. Seal6. Intake duct case (A)7. Air filter cover (A)8. Intake actuator9. Air filter cover10. Air filter 11. Blower unit pad12.

    Categories

     
    Copyright © 2026 www.hioniqae.com - 0.0131