Hyundai Ioniq (AE): Interior Trim / Door Step Trim. Repair procedures

Replacement
[Front door step trim]
   
•
Put on gloves to prevent hand injuries.
   
•
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
•
When removing the interior trim pieces, use a plastic panel removal tool not to damage the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Using a screwdriver or remover, remove the front door step trim (A).

2.
To install, reverse the removal procedure.
   
•
Replace any damaged clips (or retainers or fasteners).
[Rear door step trim]
   
•
Put on gloves to prevent hand injuries.
   
•
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
•
When removing the interior trim pieces, use a plastic panel removal tool not to damage the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Using a screwdriver or remover, remove the rear door step trim (A).

2.
To install, reverse the removal procedure.
   
•
Replace any damaged clips (or retainers or fasteners).

    Component1. Front door step trim 2. Rear door step trim

    Component Location 1. Cowl side trim

    Other information:

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: In-car Sensor. Description and operation

    DescriptionThe In-car air temperature sensor is built in the heater & A/C control unit.The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside temperature, is delivered to heater control unit and according to this signal the contr

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Duct Sensor. Components and components location

    C

    Categories

     
    Copyright © 2026 www.hioniqae.com - 0.0125