Hyundai Ioniq: Airbag Module / Driver Airbag (DAB) Module and Clock Spring. Components and components location

1. Driver Air Bag (DAB) 2. Steering Wheel
| 3. Clock Spring
|
Description•
Driver Air Bag (DAB)DAB is installed in the steering wheel, and electrically connected to the SRSCM via clock spring...
Removal1.Disconnect the battery negative cable and wait for at least three minutes before beginning work.2.Remove the driver airbag module by putting in a flat tool (Ø5mm) into the guide hole and then press the spring...
Other information:
Replacement
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.1.Disconnect the negative (-) battery terminal.2.Recover the refrigerant with a recovery / recycling / charging station...
DescriptionThe auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives signal from the sensor and restrains moisture and eliminate defog by controlling the intake actuator, A/C, auto defogging actuator, blower motor rpm, and mode actuator...
Categories
The front seat can be adjusted by using the levers located on the outside of
the seat cushion. Before driving, adjust the seat to the proper position so that
you can easily control the steering wheel, foot pedals and controls on the instrument
panel.
Forward and rearward adjustment

read more