Hyundai Ioniq: Airbag Module / Passenger Airbag (PAB) Module. Description and operation
The passenger airbag (PAB) is installed inside the crash pad and protects the front passenger in the event of a frontal crash. The SRSCM determines if and when to deploy the PAB.
•
| Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using a specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury. |
|
Removal1.Disconnect the battery negative cable and wait for at least three minutes before beginning work.2.Remove the driver airbag module by putting in a flat tool (Ø5mm) into the guide hole and then press the spring...
Other information:
Removal and Installation1.Remove the passenger seat RH front tire.(Refer to Suspension System - "Wheel")2. Remove the engine room under cover.(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")3.Remove the drive belt(Refer to Timing System - "Drive Belt")4...
Components1. Camshaft bearing cap2. Front camshaft bearing cap3. Exhaust camshaft4. Intake camshaft5. Exhaust CVVT assembly6. Intake CVVT assembly7. Cylinder head assembly8. Cylinder head gasket9. Retainer lock10. Retainer11. Valve spring12. Valve stem seal13...
Categories

Air bag warning labels, required by the U.S. National Highway Traffic Safety
Administration (NHTSA), are attached to alert the driver and passengers of potential
risks of the air bag system. Be sure to read all of the information about the air
bags that are installed on your vehicle in this Owners Manual.
read more