Hyundai Ioniq: Suspension System / Special service tools
Tool (Number and Name)
|
Illustration
|
Use
|
09568-1S100
| | Saperate the ball joint from the front alxe
|
09546-3X100 Shock absorber lock nut removal tool
| | Used for remove the shock absorber lock nut.
|
SpecificationsFront Suspension
Item
Specification
Suspension typeMac Pherson StrutShock absorberTypeConventional valveRear Suspension
Item
Specification
Suspension type Multi linkShock absorberTypeConventional valveWheel & Tire
Item
Specification
Front
Rear
Aluminum6...
Troubleshooting
Symptom
Possible cause
Remedy
Hard steeringImproper front wheel alignmentExcessive turning resistance of lower arm ball jointLow tire pressureNo power assistCorrectReplaceAdjustRepair and replacePoor return of steering wheel to centerImproper front wheel alignmentCorrectPoor or rough rideImproper front wheel alignmentMalfunctioning shock absorberBroken or worn stabilizerBroken or worn coil springWorn lower arm bushingCorrectRepair or replaceReplaceReplaceReplace the lower arm assemblyAbnormal tire wearImproper front wheel alignmentImproper tire pressureMalfunctioning shock absorberCorrectAdjust or replaceReplaceWanderingImproper front wheel alignmentPoor turning resistance of lower arm ball jointLoose or worn lower arm bushingCorrectRepairRetighten or replaceVehicle pulls to one sideImproper front wheel alignmentExcessive turning resistance of lower arm ball jointBroken or worn coil springBent lower armCorrectReplaceReplaceRepairSteering wheel shimmyImproper front wheel alignmentPoor turning resistance of lower arm ball jointBroken or worn stabilizerWorn lower arm bushingMalfunctioning shock absorberBroken or worn coil springCorrectReplaceReplaceReplaceReplaceReplaceBottomingBroken or worn coil springMalfunctioning shock absorberReplaceReplaceWheel /tire noise, vibration and harshness concerns are directly related to vehicle speed and are not generally affected by acceleration, coasting or decelerating...
Other information:
Removal1.Disconnect the negative (-) battery cable.2.Remove the crash pad lower panel.(Refer toBody - "Crash Pad")3.Remove the junction box.(Refer to Body Electrical System - "Fuses and Relays")4.Disconnect the parking brake switch connector (A).5.Loosen the screw and then remove the parking brake switch...
Power Brakes
Your vehicle has power-assisted brakes that adjust automatically through normal
usage.
If the vehicle is not in the ready ()
mode or the vehicle is turned off while driving, the power assist for the brakes
will not work.You can still stop your vehicle by applying greater force to the brake
pedal than typical...
Categories
The front seat can be adjusted by using the levers located on the outside of
the seat cushion. Before driving, adjust the seat to the proper position so that
you can easily control the steering wheel, foot pedals and controls on the instrument
panel.
Forward and rearward adjustment
read more