| Specifications |
|
Items
|
AUDIO
|
| Model | RADIO/CD/MP3 |
| Power supply | DC 14.4V |
| Parasitic current | Max. 1mA (Head unit only) |
| Antenna | 80PF 75Ω |
| Tuning type | PLL SYNTHESIZED TUNING |
Component Location1. Audio unit2. Antenna feeder cable connector3. Roof antenna (Audio)4. Front door speaker5. Rear door speaker6. Antenna feeder cable7.
DescriptionThe temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the temperature will be regulated by the hot/cold air ratio decided by the position of the temper
Inspection1.Turn the ignition switch OFF. 2.Disconnect the auto defogging connector. 3.Verify that the auto defogging actuator operates to the open position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the auto defogging actuator operates to the close position when connected in reverse.