| Specification |
|
Item
|
Specification
|
| Rated Current (A) | 30 |
Removal1.Refer to Brake System - "Brake System".Installation1.Refer to Brake System - "Brake System".Inspection1.Refer to Brake System - "Brake System".
Component Location1. DC Fuse2. Inverter Connector [↔ Power Relay Assembly (PRA)]3. Inverter Connector [↔ Electric A/C compressor]
DescriptionThe ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.The sensor output will be used for discharge temperature control, temperature regulation door contrl, blower m
Inspection1.Turn the ignition switch OFF.2.Disconnect the mode control actuator connector.3.Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.Verify that the mode control actuator operates to the vent mode when connected in reverse.