| Specifications |
|
Items
|
Specifications
|
| Operation method | BLDC Motor |
| Input voltage (V) | 12 |
| Max power (W) | 480 |
| Operating temperature (°C) | - 30 to 105 °C |
| Resistance (Ω) | 120 |
| Max pressure | 43 bar |
Components 1. Clutch disc2. Clutch cover3. Concentric slave cylinder4. Hybrid motor assembly5. Engine clutch actuator6. Reservoir
Circuit Diagram
DescriptionThe A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed. Engine ECU stops the operation of the compressor when the temperature of refrigerant line is very high or very
Inspection1.Turn the ignition switch OFF.2.Disconnect the mode control actuator connector.3.Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.Verify that the mode control actuator operates to the vent mode when connected in reverse.