| Basic Service Symbols |
|
Symbol
|
Meaning
|
| Do not reuse the part. Replace a new one. |
| Apply engine oil or transmission oil to the part. |
| Apply automatic transmission fluid (ATF) to the part. |
| Apply grease to the part. |
| Apply sealant to the part. |
Replacement When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.1.Disconnect the negative (-) battery terminal.2.Recover the refrigerant with a recovery / recycling / charging station.
Removal1.Disconnect the negative (-) battery terminal.2.Remove the rear bumper.(Refer to Body - "Rear Bumper")3.Remove the rear corner radar unit (A) after loosening the mounting nuts. • Take care not to separate the bracket from rear bumper when removing the rear corner radar sensor.