Hyundai Ioniq (AE): Engine Control System / Heated Oxygen Sensor (HO2S). Specifications
| Specification |
|
Item
|
Specification
|
| Heater Resistance (Ω) | 2.4 - 4.0 [20°C (68°F)] |
|
A/F Ratio (λ)
|
Output Voltage (V)
|
| RICH | 0.6 - 1.0 |
| LEAN | 0 - 0.4 |
|
Item
|
Specification
|
| Heater Resistance (Ω) | Approx. 9.0 [20°C (68°F)] |
DescriptionHeated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter.
Circuit Diagram
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Auto Defoging Actuator. Repair procedures
Inspection1.Turn the ignition switch OFF. 2.Disconnect the auto defogging connector. 3.Verify that the auto defogging actuator operates to the open position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the auto defogging actuator operates to the close position when connected in reverse.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Parking Distance Warning (PDW) Sensor. Repair procedures
Removal1.Disconnect the negative (-) battery terminal.2.Remove the front / rear bumper cover.(Refer to Body - "Front Bumper Cover")(Refer to Body - "Rear Bumper Cover")3.Disconnect the connector (A) from the parking assist sensor.4.Remove the sensor (A) by pulling out both ends of the sensor holder.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- If the 12 Volt Battery is Discharged (Hybrid Vehicle)
- Suspension System
- Heating, Ventilation and Air Conditioning
- New on site
- Most important about car
