Hyundai Ioniq (AE): Blind-spot Collision Warning (BCW) system / RCCW (Rear Cross-Traffic Collision Warning)

The Rear Cross-Traffic Collision Warning function monitors approaching cross traffic from the left and right side of the vehicle when your vehicle is in reverse.

Operating conditions

To operate:

Cluster type A

Go to the 'User Settings → Driver Assistance → Rear Collision Warning and select Rear Cross- Traffic Collision Warning' on the LCD display.

Cluster type B

Go to the 'User Settings → Driver Assistance and select Rear Cross- Traffic Collision Warning' on the LCD display

The system will turn on and standby to activate. The system will activate when vehicle speed is below 6 mph (10 km/h) and with the shift lever in R (Reverse).

If the function is deselected from the instrument cluster, the function will deactivate.

Information

• The last selected setting (ON or OFF) of the RCCW is remained in the system.
• The system will activate when vehicle speed is below 6 mph (10 km/h) and with the shift lever in R (Reverse).
• The RCCW (Rear Cross-Traffic Collision Warning) detecting range is approximately 1 ft ~ 65 ft (0.5 m ~ 20 m) in the direction of both lateral sides of the vehicle.

An approaching vehicle will be detected if their vehicle speed is within 2.5 ~ 22.5 mph (4 km/h ~ 36 km/h).

Note that the detecting range may vary under certain conditions. As always, use caution and pay close attention to your surroundings when backing up your vehicle.

• Warning type