| Specifications |
|
Item
|
Specifications
|
| Rated voltage | DC 12V |
| Operating Voltage | DC 9V - 16V |
| Operating Temperature Range | -30°C to 75°C |
| Dark current | Max. 1㎃ |
|
Item
|
Specifications
|
| Rated voltage | DC 5V |
| Type | Soft Feeling Tact type |
| Operating Temperature Range | -30°C to 80°C |
Components1. Memory power seat unit (PSM)2. IMS control switch3. Outside Mirror
DescriptionThe temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the temperature will be regulated by the hot/cold air ratio decided by the position of the temper
Inspection1.Connect the battery voltage and check the blower motor rotation.2.If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation.3.Replace the blower motor if it is proved that there is a problem with it.