Hyundai Ioniq (AE): Hybrid Control System / Specifications

Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual / Hybrid Control System / Hybrid Control System / Specifications

Specifications
Brake Switch
â–· Type : ON/OFF Switch
â–· Specification
Item
Brake Pedal Release
Brake Pedal Push
Switch 1
Max. 0.5V
Battery Voltage
Switch 2
IG OFF
Max. 50 mV
IG ON
Battery Voltage
Max. 0.5V

Items
Specification
Gap [mm (in)]
1.0 - 2.0 (0.039 - 0.079)

DC Fuse
â–· Specification
Item
Specification
Rated Current (A)
30

    DescriptionThe HCU (Hybrid Control Unit) controls whole hybrid systems and is connected with each control modules (ECM, TCM, MCU, BMS ECU etc.) by CAN interface.

    Component Location1. HPCU (Hybrid Power Control Unit)2. HCU (Hybrid Control Unit)3. Brake Switch4. DC Fuse    â€¢ HPCU includes the HCU (Hybrid Control Unit), Inverters (for Drive Motor, HSG and Electric A/C Compressor), MCU (Motor Control Unit) and LDC (Low DC / DC Converter).

    Other information:

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Blower Unit. Repair procedures

    Replacement    When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.1.Disconnect the negative (-) battery terminal.2.Recover the refrigerant with a recovery / recycling / charging station.

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Description and operation

    DescriptionRear view monitor (RVM) will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position.This system is a supplemental system that shows behind the vehicle through the AV monitor while backing-up.    â€¢ This system is a supplementary function only.

    Categories

     
    Copyright © 2026 www.hioniqae.com - 0.0192