Hyundai Ioniq (AE): Engine Control System / Exhaust Gas Temperature Sensor (EGTS). Specifications
| Specification |
|
Temperature [°C (°F)]
|
Resistance (kΩ)
|
| -40 (-40) | 0.17 |
| 0 (-32) | 0.201 |
| 100 (212) | 0.276 |
| 200 (392) | 0.35 |
| 300 (572) | 0.42 |
| 400 (752) | 0.489 |
| 500 (932) | 0.555 |
| 600 (1112) | 0.618 |
| 700 (1292) | 0.68 |
| 800 (1472) | 0.739 |
| 850 (1562) | 0.767 |
DescriptionInstalled in exhaust manifold, the Exhaust Gas Temperature Sensor (EGTS) #1 for EWGA senses the temperature of exhaust gas flowing into the EWGA.
Circuit DiagramEGTS #1Harness ConnectorEGTS #2Harness Connector
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: emperature Control Actuator. Description and operation
DescriptionThe temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the temperature will be regulated by the hot/cold air ratio decided by the position of the temper
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Auto Defoging Actuator. Repair procedures
Inspection1.Turn the ignition switch OFF. 2.Disconnect the auto defogging connector. 3.Verify that the auto defogging actuator operates to the open position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the auto defogging actuator operates to the close position when connected in reverse.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Jump starting procedure
- Brake System
- DCT(Dual Clutch Transmission) System
- New on site
- Most important about car
