Hyundai Ioniq: Gauges and Meters / Hybrid battery SOC (State of Charge) gauge

This gauge indicates the remaining hybrid battery power. If the SOC is near the
"L (Low)" level, the vehicle automatically operates the engine to charge the battery.
However, if the Service Indicator (
)
and Malfunction Indicator Lamp (MIL) (
)
turn on when the SOC gauge is near the "L (Low)" level, have the vehicle be checked
by an authorized HYUNDAI dealer.
NOTICE
Never try to start the vehicle if the fuel tank is empty. In this condition,
the engine cannot charge the high voltage battery of the hybrid system. If you try
to start the vehicle when the fuel is empty, the high voltage battery will become
discharged and be damaged.
Power gauge
The power gauge indicates whether the current driving condition is fuel efficient
or not.
• CHARGE :
Shows that the energy made by the vehicle is being converted to electrical energy...
CD (Charge Depleting, Electric) mode : The high-voltage (hybrid) battery
is used to drive the vehicle.
CS (Charge Sustaining, Hybrid) mode : The high-voltage (hybrid) battery
and gasoline engine is used to drive the vehicle...
Other information:
Removal 1.Disconnect the negative battery terminal.
•
After disconnecting the cables, wait at least 3 minutes.2.Remove the front seat assembly.(Refer to Body - "Front Seat Assembly")3.Remove the front seat back cover...
Inspection1.Turn the ignition switch OFF.2.Disconnect the temperature control actuator connector.3.Verify that the temperature control actuator operates to the cool position when connecting 12V to terminal 3 and grounding terminal 7.Verify that the temperature control actuator operates to the warm position when connected in reverse...
Categories

Adjusting the side mirrors:
1. Press either the L (driver's side) or R (passenger's side) button (1) to select
the side view mirror you would like to adjust.
read more