Hyundai Ioniq (AE): Hybrid Control System / Components and components location

Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual / Hybrid Control System / Hybrid Control System / Components and components location

Component Location

1. HPCU (Hybrid Power Control Unit)
2. HCU (Hybrid Control Unit)
3. Brake Switch
4. DC Fuse

   
•
HPCU includes the HCU (Hybrid Control Unit), Inverters (for Drive Motor, HSG and Electric A/C Compressor), MCU (Motor Control Unit) and LDC (Low DC / DC Converter).
   
•
For the location of the other control modules, refer to the relevant group.
1. HPCU (Hybrid Power Control Unit)
2. HCU (Hybrid Control Unit)
3. Brake Switch

4. DC Fuse



    SpecificationsBrake Switchâ–· Type : ON/OFF Switchâ–· Specification Item Brake Pedal Release Brake Pedal Push Switch 1 Max.

    DescriptionThe Hybrid Power Control Unit (HPCU) is an integrated power conversion unit which consists of the two inverters, LDC, and HCU.

    Other information:

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Heater Unit. Components and components location

    Component Location1. Heater unit assemblyCompoents1. Heater core cover2. Heater core & Seal assembly3. Mode actuator [LH]4. Temperature control actuator [LH]5. Shower duct [LH]6. Duct sensor [Floor]7. PTC Heater8. Duct sensor [Vent]9. Heater & Evaporator lower case10.

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Front View Camera Unit. Repair procedures

    Removal1.Disconnect the negative (-) battery terminal.2.Remove the front view camera cover (A).3.Disconnect the front view camera connector (A).4.Remove the front view camera after disengaging the mounting bracket (A).Installation1.Align front view camera with windshield bracket using forward edge point (A).

    Categories

     
    Copyright © 2026 www.hioniqae.com - 0.0183