Hyundai Ioniq (AE): Hybrid Control System / Specifications

Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual / Hybrid Control System / Hybrid Control System / Specifications

Specifications
Brake Switch
â–· Type : ON/OFF Switch
â–· Specification
Item
Brake Pedal Release
Brake Pedal Push
Switch 1
Max. 0.5V
Battery Voltage
Switch 2
IG OFF
Max. 50 mV
IG ON
Battery Voltage
Max. 0.5V

Items
Specification
Gap [mm (in)]
1.0 - 2.0 (0.039 - 0.079)

DC Fuse
â–· Specification
Item
Specification
Rated Current (A)
30

    DescriptionThe HCU (Hybrid Control Unit) controls whole hybrid systems and is connected with each control modules (ECM, TCM, MCU, BMS ECU etc.) by CAN interface.

    Component Location1. HPCU (Hybrid Power Control Unit)2. HCU (Hybrid Control Unit)3. Brake Switch4. DC Fuse    â€¢ HPCU includes the HCU (Hybrid Control Unit), Inverters (for Drive Motor, HSG and Electric A/C Compressor), MCU (Motor Control Unit) and LDC (Low DC / DC Converter).

    Other information:

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: PTC Heater. Repair procedures

    InspectionOperating Logic Test (Manual only)Inspect the PTC operation by confirmation logic as follows.1.Entering(1)Set the Floor mode and maximum heating position.(2)Turn off the blower switch.(3)Press the intake (recirculation) button 5 times or more.

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Repair procedures

    Service Point Target Auto Calibration (SPTAC)When you need calibration :– Front view camera is removed and mounted– Replace front view camera with a new one – Windshield glass changed– Front view camera coupler of the windshield glass is deformedService Point T

    Categories

     
    Copyright © 2026 www.hioniqae.com - 0.0121