Hyundai Ioniq (AE): Hybrid Control System / Hybrid Control System
- Description and operation
- Specifications
- Components and components location
- HPCU (Hybrid Power Control Unit). Description and operation
- HPCU (Hybrid Power Control Unit). Components and components location
- HPCU (Hybrid Power Control Unit). Repair procedures
- HCU (Hybrid Control Unit). Schematic diagrams
- HCU (Hybrid Control Unit). Repair procedures
- Brake Switch. Description and operation
- Brake Switch. Specifications
- Brake Switch. Schematic diagrams
- Brake Switch. Repair procedures
- DC Fuse. Specifications
- DC Fuse. Components and components location
- DC Fuse. Schematic diagrams
- DC Fuse. Repair procedures
Basic TroubleshootingBasic Inspection ProcedureMeasuring Condition of Electronic Parts' ResistanceThe measured resistance at high temperature after vehicle running may be high or low.
DescriptionThe HCU (Hybrid Control Unit) controls whole hybrid systems and is connected with each control modules (ECM, TCM, MCU, BMS ECU etc.) by CAN interface.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Rear Corner Radar Unit. Repair procedures
Removal1.Disconnect the negative (-) battery terminal.2.Remove the rear bumper.(Refer to Body - "Rear Bumper")3.Remove the rear corner radar unit (A) after loosening the mounting nuts. • Take care not to separate the bracket from rear bumper when removing the rear corner radar sensor.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Warning Indicator. Repair procedures
RemovalWarning Indicator1.Disconnect the negative (-) battery terminal.2.Remove the mirror (A).InstallationWarning Indicator1.Install the outside mirror.2.Connect the negative (-) battery terminal.Inspection1.Apply battery voltage to each terminal as shown in the table and verify that the mirror operates properly.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Body (Interior and Exterior)
- Maintenance
- Jump Starting
- New on site
- Most important about car
