Hyundai Ioniq: Engine Control System / Knock Sensor (KS). Schematic diagrams
![](images/knock_sensor_ks_schematic_diagrams-689/413/saefl6h028l.gif)
Removal 1.Turn the ignition switch OFF and disconnect the battery negative (-) cable.2.Remove the intake manifold. (Refer to Engine Mechanical System - "Intake Manifold")3...
Other information:
Schematic DiagramCanisterCanister is filled with charcoal and absorbs evaporated vapor in fuel tank. The gathered fuel vapor in canister is drawn into the intake manifold by the ECM/PCM when appropriate conditions are set.Purge Control Solenoid Valve (PCSV)Purge Control Solenoid Valve (PCSV) is installed in the passage connecting canister and intake manifold...
When your brake pads are worn and new pads are required, you will hear a high
pitched warning sound from your front or rear brakes. You may hear this sound come
and go or it may occur whenever you depress the brake pedal.
Note that some driving conditions or climates may cause a brake squeal when you
first apply (or lightly apply) the brakes...
Categories
Adjust the steering wheel so it points toward your chest, not toward your face.
Make sure you can see the instrument cluster warning lights and gauges. After adjusting,
push the steering wheel both up and down to be certain it is locked in position.
Always adjust the position of the steering wheel before driving.
WARNING
NEVER adjust the steering wheel while driving. This may cause loss of vehicle
control resulting in an accident.
![Hyundai Ioniq. Tilt Steering / Telescope Steering](images/books/1/hyundai_ioniq_tilt_steering_telescope_steering_126.png)
read more