Hyundai Ioniq: Smart Cruise Control System / Sensor to Detect Distance to the Vehicle Ahead
The Smart Cruise Control uses a sensor to detect distance to the vehicle ahead.
Warning message
Smart Cruise Control disabled. Radar blocked
When the sensor lens cover is blocked with dirt, snow, or debris, the Smart Cruise
Control System operation may stop temporarily. If this occurs, a warning message
will appear on the LCD display. Remove any dirt, snow, or debris and clean the radar
sensor lens cover before operating the Smart Cruise Control System. The Smart Cruise
Control system may not properly activate, if the radar is totally contaminated,
or if any substance is not detected after the vehicle is in the ready (
)
mode (e.g. in an open terrain).
CAUTION
- Do not apply license plate frame or foreign objects such as a bumper sticker or a bumper guard near the radar sensor. Doing so may adversely affect the sensing performance of the radar.
- Always keep the radar sensor and lens cover clean and free of dirt and debris.
- Use only a soft cloth to wash the vehicle. Do not spray pressurized water directly on the sensor or sensor cover.
- Be careful not to apply unnecessary force on the radar sensor or sensor cover. If the sensor is forcibly moved out of proper alignment, the Smart Cruise Control System may not operate correctly. In this case, a warning message may not be displayed. Have the vehicle inspected by an authorized HYUNDAI dealer.
- If the front bumper becomes damaged in the area around the radar sensor, the Smart Cruise Control System may not operate properly. Have the vehicle inspected by an authorized HYUNDAI dealer.
- Use only genuine HYUNDAI parts to repair or replace a damaged sensor or sensor cover. Do not apply paint to the sensor cover.
Check Smart Cruise Control System
The message will appear when the vehicle to vehicle distance control system is not functioning normally.
Take your vehicle to an authorized HYUNDAI dealer and have the system checked.
Smart Cruise Control Vehicleto- Vehicle Distance
To set Vehicle-to-Vehicle Distance
When the Smart Cruise Control System is ON, you can set and maintain the distance
from the vehicle ahead of you without pressing the accelerator or brake pedal...
To Adjust the Sensitivity of Smart Cruise Control
The sensitivity of vehicle speed when following the front vehicle to maintain
the set distance can be adjusted on the LCD display.
Cluster type A
'User Settings → Driver Assistance → Smart Cruise Control → Response → Fast/Normal/Slow'
Cluster type B
'User Settings → Driver Assistance → SCC reaction → Fast/Normal/ Slow'
You may select one of the three stages you prefer...
Other information:
Hyundai Ioniq (AE) 2017-2025 Service Manual: MDPS Column and Housing. Repair procedures
Removal1.Remove the MDPS assembly.(Refer to Steering System - "MDPS Assembly")2.Remove the MDPS control unit.(Refer to Steering System - "MDPS Control Unit")3.Remove the MDPS motor.(Refer to Steering System - "MDPS Motor")Installation1.Install in the reverse order of removal...
Hyundai Ioniq (AE) 2017-2025 Service Manual: Front Door Trim. Repair procedures
Replacement • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components...
Categories
- Manuals Home
- 1st Generation Ioniq Owners Manual
- 1st Generation Ioniq Service Manual
- Folding the side view mirrors
- Check Hybrid system, Check Hybrid system. Turn engine Off
- Smart Cruise Control System
- New on site
- Most important about car
Seatback pocket
The seatback pocket is provided on the back of the front passenger's seatback.
WARNING
To prevent the Occupant Classification System from malfunctioning:
