Hyundai Ioniq (AE): Smart Cruise Control System / To Adjust the Sensitivity of Smart Cruise Control

Hyundai Ioniq. To Adjust the Sensitivity of Smart Cruise Control

The sensitivity of vehicle speed when following the front vehicle to maintain the set distance can be adjusted on the LCD display.

Cluster type A

'User Settings → Driver Assistance → Smart Cruise Control → Response → Fast/Normal/Slow'

Cluster type B

'User Settings → Driver Assistance → SCC reaction → Fast/Normal/ Slow'

You may select one of the three stages you prefer.

• Fast:

Vehicle speed following the front vehicle to maintain the set distance is faster than normal speed.

• Normal:

Vehicle speed following the front vehicle to maintain the set distance is normal.

• Slow:

Vehicle speed following the front vehicle to maintain the set distance is slower than normal speed.

Information

The last selected speed sensitivity of the smart cruise control is remained in the system.

    The Smart Cruise Control uses a sensor to detect distance to the vehicle ahead. Warning message Smart Cruise Control disabled. Radar blocked When the sensor lens cover is blocked with dirt, snow, or debris, the Smart Cruise Control System operation may stop temporarily.

    The driver may choose to switch to use the conventional Cruise Control mode (speed only control function) by following these steps: 1. Push the CRUISE button on the steering wheel to turn the system on.

    Other information:

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Rear Corner Radar Unit. Repair procedures

    Removal1.Disconnect the negative (-) battery terminal.2.Remove the rear bumper.(Refer to Body - "Rear Bumper")3.Remove the rear corner radar unit (A) after loosening the mounting nuts.    â€¢ Take care not to separate the bracket from rear bumper when removing the rear corner radar sensor.

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Specifications

    S

    Categories

     
    Copyright © 2026 www.hioniqae.com - 0.026