| Specifications |
|
Items
|
Specification
|
| Rated voltage | DC 12V |
| Operating voltage | 9V - 16V |
| Operating speed | 30㎞/h - 255㎞/h |
| Sensible distance | 30m (Sedan) |
| Curvature radius | Start : More than 125m/30km/h Stop : Less than 125m |
| Frequency | 24 GHz |
| Numbers | 2EA (Master 1EA, Slave 1EA) |
Components1. Rear Corner Radar Unit2. Rear Corner Safety ON/OFF Switch3. Speaker4. Warning Indicator5. Cluster
Inspection1.Connect the battery voltage and check the blower motor rotation.2.If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation.3.Replace the blower motor if it is proved that there is a problem with it.
Removal1.Disconnect the negative (-) battery terminal.2.Remove the tailgate lid trim.(Refer to Body - "TailGate Lid Trim")3.Disconnect the Rear view camera connector (A).4.Remove the Rear view camera assembly after loosening the mounting screws.Installation1.