| Replacement |
| 1. | Remove the sunroof assembly. (Refer to Sunroof - "Sunroof Assembly") |
| 2. | Remove the sunroof sunshade. (Refer to Sunroof - "Sunroof Sunshade") |
| 3. | Down the slide by pushing it and then remove the drip link assembly (A).
|
| 4. | Separate the drip link (B) and guide (A).
|
| 5. | Remove the shoe (A).
|
| 6. | Separate the guide assembly (A) and the cable (B) by pushing them in the direction of the arrow.
|
| 7. | To install, reverse the removal procedure.
|
Replacement1.Remove the sunroof assembly.(Refer to Sunroof - "Sunroof Assembly") 2.After loosening the mounting screws, remove the drip rail assembly (A).
Inspection1.Turn the ignition switch OFF.2.Disconnect the intake actuator connector.3.Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.Verify that the intake actuator operates to the recirculation position when connected in reverse.
Removal1.Disconnect the negative (-) battery terminal.2.Remove the front view camera cover (A).3.Disconnect the front view camera connector (A).4.Remove the front view camera after disengaging the mounting bracket (A).Installation1.Align front view camera with windshield bracket using forward edge point (A).