Hyundai Ioniq (AE): Charging the Plug-in Hybrid Vehicle / Charging Status
When charging the high voltage battery, the charge level can be checked from outside the vehicle.
Charging Information • Normal Charge : The plug-in hybrid vehicle is charged by plugging into a normal charger installed in your home or a public charging station.
You may select when the charging connector can be locked and unlocked in the charging inlet. Press the button to change between AUTO mode and LOCK mode.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Auto Defogging Sensor. Repair procedures
Diagnosis With GDS1.The heating, ventilation and air conditioning can be quickly diagnosed failed parts with vehicle diagnostic system (GDS).※ The diagnostic system (GDS) provides the following information.(1) Self diagnosis : Checking the failure code (DTC) and display.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: emperature Control Actuator. Description and operation
DescriptionThe temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the temperature will be regulated by the hot/cold air ratio decided by the position of the temper
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- If the 12 Volt Battery is Discharged (Hybrid Vehicle)
- Aux. Battery Saver+ (Plug-in hybrid vehicle)
- Engine Mounting. Components and components location
- New on site
- Most important about car
