Hyundai Ioniq (AE): Hybrid System Overview
- HEV (Hybrid Electric Vehicle) System
- PHEV (Plug-in Electric Vehicle) System
- Charging the Plug-in Hybrid Vehicle
- Charging Status
- Charging Connector AUTO / LOCK Mode
- Scheduled Charging
- Charging Precautions
- Normal Charge
- Trickle Charge
- Driving the Hybrid/Plug-in Hybrid Vehicle
- Starting the Vehicle
- Special Features
- Hybrid System Gauge
- Plug-in Hybrid Mode (Plug-in hybrid vehicle)
- AVN Screen (Plug-in hybrid vehicle)
- Aux. Battery Saver+ (Plug-in hybrid vehicle)
- Warning and Indicator Lights
- LCD Display Messages
- Energy flow
- Safety Precautions for Hybrid System
The refrigerant label provides information such as refrigerant type and amount. The label is located on the underside of the hood.
Hybrid Vehicle The HYUNDAI Hybrid Electric Vehicle (HEV) uses both the gasoline engine and the electric motor for power. The electric motor is run by a high-voltage HEV battery.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Mode Control Actuator. Description and operation
DescriptionThe mode control actuator is located at the heater unit.It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Repair procedures
Replacement1.Remove the battery (-) terminal.2.Remove the engine room under cover.(Refer to Engine Mechanical System - "Engine Room Under Cover")3.Remove the heater hose (A) and AEWP hose (B).4.Disconnect the lock pin to remove the heater hose pump connector (A).
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Engine Control/Fuel System
- Troubleshooting
- DCT(Dual Clutch Transmission) System
- New on site
- Most important about car
