Hyundai Ioniq (AE): Hybrid System Overview / Safety Precautions for Hybrid System
- High Voltage Battery System
- Safety Plug
- High Voltage Battery Cooling Duct
- If an Accident Occurs
- When the Hybrid Vehicle Shuts Off
The hybrid system informs the drivers its energy flow in various operating modes. While driving, the current energy flow is specified in 11 modes. Vehicle Stop The vehicle is stopped.
â– HPCU (Hybrid Power Control Unit) â– High Voltage Battery System WARNING Never touch orange colored or high voltage labeled components, including wires, cables, and connections.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Photo Sensor. Repair procedures
Inspection1.Turn the ignition switch ON.2.Connect the GDS.3.Emit intensive light toward the photo sensor using a lamp, and check the output voltage change.4.The voltage will rise with higher intensive light and reduce with lower intensive light.1. Auto light signal2.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: emperature Control Actuator. Description and operation
DescriptionThe temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the temperature will be regulated by the hot/cold air ratio decided by the position of the temper
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Engine Control/Fuel System
- Convenient features of your vehicle
- BMS ECU. Schematic diagrams
- New on site
- Most important about car
