Hyundai Ioniq (AE): Safety Precautions for Hybrid System / When the Hybrid Vehicle Shuts Off

When the high voltage battery is discharged, when the 12-volt battery is discharged, or when the fuel tank is empty, the hybrid system may not operate while driving. When the Hybrid system does not operate, do the followings:

1. Gradually reduce the vehicle speed. Pull over your vehicle off the road in a safe area.

2. Locate the shift lever in P (Park).

3. Turn ON the hazard warning flashers.

4. Turn OFF the vehicle, and try to start the hybrid system again, while depressing the brake pedal and turning on the Engine Start/Stop button.

5. When the hybrid system still does not operate, refer to ''If the 12 Volt Battery Is Discharged'' in chapter 6. Before jump-starting the vehicle, check the fuel level and the exact procedure to jump start. For further details, refer to ''If the 12 Volt Battery Is Discharged'' in the chapter 6. When the fuel level is low, do not attempt to drive the vehicle only with the battery power. The high voltage battery may be discharged, and the hybrid system will turn OFF.

    WARNING For your safety, do not touch high voltage cables, connectors and package modules. High voltage components are orange in color. Exposed cables or wires may be visible inside or outside of the vehicle.

    The Hyundai Ioniq AE (2017-2022) combines eco-friendly hybrid or electric efficiency with practical liftback versatility. Available as hybrid, plug-in hybrid or fully electric, the Ioniq AE offers outstanding fuel economy or zero-emission driving, along with a modern design, compact dimensions and roomy five-door usability — a perfect choice for city commuting or sustainable everyday transport.

    Other information:

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Ambient Temperature Sensor. Components and components location

    C

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Mode Control Actuator. Description and operation

    DescriptionThe mode control actuator is located at the heater unit.It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.

    Categories

     
    Copyright © 2026 www.hioniqae.com - 0.0229