| Components (1) |

| 1. Rear bumper side bracket [LH] 2. Rear bumper side bracket [RH] | 3. Rear bumper cover |
| Components (2) |

| 1. Rear bumper side under cover [LH] 2. Rear bumper side under cover [RH] | 3. Rear bumper center under cover |
Component Location 1. Rear bumper cover
InspectionOperating Logic Test (Manual only)Inspect the PTC operation by confirmation logic as follows.1.Entering(1)Set the Floor mode and maximum heating position.(2)Turn off the blower switch.(3)Press the intake (recirculation) button 5 times or more.
Inspection1.Connect the battery voltage and check the blower motor rotation.2.If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation.3.Replace the blower motor if it is proved that there is a problem with it.