The system will move the driver's seat automatically as follows:
The shift lever is in P (Park)
You can activate or deactivate the Easy Access Function from the User Settings mode on the LCD display.
The Driver Position Memory System is provided to store and recall the following memory settings with a simple button operation. - Driver's seat position - Side view mirror position - Instrument panel illumination intensity If the battery is disconnected, the position memory will be lost and the driving positions must be stored in the system again.
Inspection1.Check that the voltage values of No. 1, 2 duct sensors change1. Sensor (+ 5V)2. Sensor groundSpecification Ambient temperature [°C (°F)] Resistance (kΩ) Voltage (V) 50 (122)1.
Replacement1.Disconnect the negative (-) battery terminal. 2.Remove the heater and blower assembly.(Refer to Heater - "Heater Unit") 3.Remove the evaporator core cover (A) after loosening the mounting screws.4.Pull out the evaporator temperature sensor (A) from the evaporator core.