Removal1.Disconnect the negative (-) battery terminal.2.Remove the steering wheel.(Refer to Steering System - "Steering Wheel")3.Remove the steering column upper and lower shrouds after loosening the screws.
Component Location1. Horn switch2. Horn relay (Built - in PCB Block)3. Horn (Low)4. Horn (High)5. Clock spring
DescriptionThe A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed. Engine ECU stops the operation of the compressor when the temperature of refrigerant line is very high or very
DescriptionThe PTC (Positive Temperature Coefficient) heater is installed at the exit or the backside of the heater core.The PTC heater is an electric heater using a PTC element as an auxiliary heating device that supplements deficiency of interior heat source in highly effective hybrid engine.