Hyundai Ioniq (AE): Engine Control System / Intake Air Temperature Sensor (IATS). Specifications

Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual / Engine Control/Fuel System / Engine Control System / Intake Air Temperature Sensor (IATS). Specifications

Specification
Temperature
Resistance (kΩ)
°C
°F
-40
-40
40.93 - 48.35
-20
-4
13.89 - 16.03
0
32
5.38 - 6.09
10
50
3.48 - 3.90
20
68
2.31 - 2.57
40
104
1.08 - 1.21
60
140
0.54 - 0.62
80
176
0.29 - 0.34

    DescriptionIntake Air Temperature Sensor (IATS) is included inside Manifold Absolute Pressure Sensor and detects the intake air temperature.To calculate precise air quantity, correction of the air temperature is needed because air density varies according to the temperature.

    Circuit Diagram

    Other information:

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Warning Indicator. Repair procedures

    RemovalWarning Indicator1.Disconnect the negative (-) battery terminal.2.Remove the mirror (A).InstallationWarning Indicator1.Install the outside mirror.2.Connect the negative (-) battery terminal.Inspection1.Apply battery voltage to each terminal as shown in the table and verify that the mirror operates properly.

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Troubleshooting

    Trouble Symptom ChartsTrouble Symptom 1Trouble Symptom 2 Trouble symptom Probable cause Remedy The set vehicle speed varies greatly upward or downward"Surging" (repeated alternating acceleration and deceleration) occurs after settingMalfunction of the vehicle speed se

    Categories

     
    Copyright © 2026 www.hioniqae.com - 0.0115