| Specifications |
|
Air Flow (kg/h)
|
Frequency (kHz)
|
| -40 | 1.49 |
| -20 | 1.59 |
| -10 | 1.68 |
| -8 | 1.7 |
| -6 | 1.72 |
| 0 | 1.81 |
| 6 | 1.93 |
| 8 | 1.97 |
| 10 | 2.01 |
| 20 | 2.21 |
| 40 | 2.52 |
| 60 | 2.74 |
| 90 | 3.05 |
| 120 | 3.34 |
| 140 | 3.53 |
| 160 | 3.73 |
| 250 | 4.62 |
| 310 | 5.28 |
| 370 | 6.03 |
| 440 | 7.06 |
| 560 | 9.46 |
| 640 | 11.83 |
DescriptionMAFS uses a hot-film type sensing element to measure the mass of intake air entering the engine, and send the signal to ECM.A large amount of intake air represents acceleration or high load conditions while a small amount of intake air represents deceleration or idle.
Circuit Diagram
Removal1.Disconnect the negative (-) battery terminal.2.Remove the rear bumper.(Refer to Body - "Rear Bumper")3.Remove the rear corner radar unit (A) after loosening the mounting nuts. • Take care not to separate the bracket from rear bumper when removing the rear corner radar sensor.
C