| Specifications |
|
Items
|
Specification
|
| Rated voltage | DC 12V |
| Operating voltage | 9V - 16V |
| Operating speed | 30㎞/h - 255㎞/h |
| Sensible distance | 30m (Sedan) |
| Curvature radius | Start : More than 125m/30km/h Stop : Less than 125m |
| Frequency | 24 GHz |
| Numbers | 2EA (Master 1EA, Slave 1EA) |
Components1. Rear Corner Radar Unit2. Rear Corner Safety ON/OFF Switch3. Speaker4. Warning Indicator5. Cluster
DescriptionThe temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the temperature will be regulated by the hot/cold air ratio decided by the position of the temper
Component Location1. Blower unit assembly Components1. Duct Seal2. Intake duct case3. Air intake door assembly4. Intake door5. Seal6. Intake duct case (A)7. Air filter cover (A)8. Intake actuator9. Air filter cover10. Air filter 11. Blower unit pad12.