
The Parking Distance Warning (Reverse) System assists the driver during reverse movement of the vehicle by chiming if any object is sensed within approximately 50 in (120 cm) behind the vehicle.
This system is a supplemental system that senses objects within the range and location of the sensors, it cannot detect objects in other areas where sensors are not installed.
WARNING
Operation of the Parking Distance Warning (Reverse) System
Operating condition
Types of warning sound and indicator

NOTICE
Rear View Monitor The Rear View Monitor will activate when the vehicle is in the ready () mode and when you shift to the R (Reverse) position. This is a supplemental system that helps provide a view of the area behind the vehicle through the A/V display while the vehicle is in the R (Reverse) position.
The Parking Distance Warning (Reverse) System may not operate normally when: Moisture is frozen to the sensor. The sensor is covered with dirt or debris such as snow or ice, or the sensor cover is blocked.
Replacement1.Remove the battery (-) terminal.2.Remove the engine room under cover.(Refer to Engine Mechanical System - "Engine Room Under Cover")3.Remove the heater hose (A) and AEWP hose (B).4.Disconnect the lock pin to remove the heater hose pump connector (A).
Removal1.Disconnect the negative (-) battery terminal.2.Remove the tailgate lid trim.(Refer to Body - "TailGate Lid Trim")3.Disconnect the Rear view camera connector (A).4.Remove the Rear view camera assembly after loosening the mounting screws.Installation1.