Hyundai Ioniq (AE): Gauges and Meters / Plug-in hybrid mode indicator

Hyundai Ioniq. Plug-in hybrid mode indicator

  • CD (Charge Depleting, Electric) mode : The high-voltage (hybrid) battery is used to drive the vehicle.
  • CS (Charge Sustaining, Hybrid) mode : The high-voltage (hybrid) battery and gasoline engine is used to drive the vehicle.

Information

Even when the battery charging rate is high and driving in electric mode is possible, engine may turn on in some areas to protect the system.

    This gauge indicates the remaining hybrid battery power. If the SOC is near the "L (Low)" level, the vehicle automatically operates the engine to charge the battery.

    This gauge indicates the current outside air temperatures by 1°F (1°C). - Temperature range : -40°F ~ 140°F (-40°C ~ 60°C) The outside temperature on the display may not change immediately like a general thermometer (to avoid distracting the driver).

    Other information:

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Rear Corner Radar Unit. Repair procedures

    Removal1.Disconnect the negative (-) battery terminal.2.Remove the rear bumper.(Refer to Body - "Rear Bumper")3.Remove the rear corner radar unit (A) after loosening the mounting nuts.    â€¢ Take care not to separate the bracket from rear bumper when removing the rear corner radar sensor.

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Warning Indicator. Repair procedures

    RemovalWarning Indicator1.Disconnect the negative (-) battery terminal.2.Remove the mirror (A).InstallationWarning Indicator1.Install the outside mirror.2.Connect the negative (-) battery terminal.Inspection1.Apply battery voltage to each terminal as shown in the table and verify that the mirror operates properly.

    Categories

     
    Copyright © 2026 www.hioniqae.com - 0.0126